- Elderly dog ​​joint care mattressCubePilot Cube Kore Carrier Board

Title Default Title
Qty:

Description

  • Connectors for every function of CubePilot The Cube Black (not included)
  • Power and signal for ESCs conveniently located in corners
  • Up to 12-cell Lithium battery (50.4V)
  • 12V navigation light power available at each corner
  • Easily accessible PWM voltage level selector (3.3V or 5V)
  • Connector-compatible with the standard ProfiCNC carrier board

The Cube Kore Multi-Rotor Carrier Board is a carrier board with power and signal for ESCs conveniently located in corners, 12V navigation light power available at each corner built-in power distribution and Built-in voltage and current sense. It also features Payload connectors with resettable fuses for 5V, 12V, and direct battery power as well as Good power, error indicator lights, Built-in buzzer with volume control and Connectors for every function of Pixhawk Cube.

Has easily accessible PWM voltage level selector (3.3V or 5V) and Resistant to ground bounce on PWM signal. Connector-compatible with standard ProfiCNC carrier board and Connector ports for debugging IO and FMU processors.

  • 1 x Cube Kore Multi-Rotor Carrier Board

Standard Cables

  • 4-pin JST GH
  • 6-pin JST GH

Payload Power Cables

  • 4-pin Clik-Mate 1.25mm (for 5V payload power)
  • 5-pin Clik-Mate 1.25mm (for 12V payload power)
  • 6-pin Clik-Mate 1.25mm (for battery payload power)

CubePilot Cube Kore Carrier Board - Click to Enlarge

CubePilot

  • Up to 12-cell Lithium battery (50.4V)
  • 140A continuous current with 280A surges
  • Power and signal for ESCs conveniently located in corners
  • 12V navigation light power available at each corner
  • Built-in power distribution
  • Built-in voltage and current sense
  • Redundant power supplies for flight critical components
  • Payload connectors with resettable fuses for 5V, 12V, and direct battery power
  • Good power and error indicator lights
  • Built-in buzzer with volume control
  • Connectors for every function of Pixhawk Cube
  • Easily accessible PWM voltage level selector (3.3V or 5V)
  • Resistant to ground bounce on PWM signal
  • Connector-compatible with the standard ProfiCNC carrier board
  • Connector ports for debugging IO and FMU processors